The 4.3-inch smart door viewer features a rechargeable lithium battery and three intelligent modes: At Home, Away, and Do Not Disturb. Automatically captures photos/videos when visitors press the doorbell, with TF card storage. Large screen displays outdoor environment at switch press, supporting manual photo capture. Ideal for home security.
1.The product is installed in the position of the peephole on the door, replaces the optical peephole mirror, and displays the image outside the door clearly on the screen of the host inside the door, allowing the owner to see the visitor outside the door at home and take photos manually.
2.The outboard machine replaces the traditional optical cat’s eye, and does not need eyes to look at. It has a wide viewing range and is not limited by height. It can be applied to the elderly and children.
4.Built-in hidden camera of outdoor machine, the appearance is similar to the traditional door viewer (CMOS 1 million pixels, maximum support 1280 * 720P, displaying / recording outdoor screen)
5.The door unit is with 3.5-inch IPS LCD screen and 960*240 screen resolution.
6.The host uses a single button operation, simple operation, functional and practical.
7.The machine supports TF card, maximize up to support 32G.
8.It can not be shot photo without TF card,which is also can be used at hotel for better protection for visitor’s privacy.
Taking photos manually at home by inserting a memory card for record, storage and enquiry.
Automatic cycle coverage, intelligent identification. After the TF card is fully stored, the new photos will automatically overwrite the oldest ones in chronological order, eliminating the need for regular deletion and automatically saving photos or videos of the most recent time.
9.The machine provides a recording mode:
Photographing mode: short press the menu button to take photos when the machine is monitoring.
10.Short press the menu button in standby to enter the monitoring mode, when monitoring, short press the menu button to take photo for current image, long press the menu button to enter the photo viewing mode, and short press in the photo viewing to browse the next Photo, long press the menu button to exit the photo viewing mode in the photo viewing state. The machine automatically shuts off in 15 seconds without any operation, and there is no manual shutdown function.
11.Two power supply methods:
3 sets AA dry batteries;
5V1A-5V2A Micro USB, powering the machine.
12.The machine is designed for energy saving and power saving. The indoor unit automatically enters the standby state for 15 seconds. It takes about 180 days for standby, and it can be used for about 90 days (see the power saving prompt card for details).
13.Easy to use.
1) Install the machine on the door according to the instructions.
2) Power the machine (battery or micro USB connection)
3) Watch situation outside through indoor units.
4）Can fit in the memory card (if you need to keep the photos), Press the button to watch outside the door, which you can take photos, browse photos / videos, it is recommended to use high-speed TF card. With the setting of your own DIY requirements, you can browse the introduction of the manual for details.
Product introduction:
Monitor outside the machine will start when pressing the menu button and outdoor picture will displayed on the screen. When the machine starts, then outside picture is displayed on the screen.(TF card needed)
Photo taking when the outdoor picture is showed on screen, short press the menu button the photos finished.
Browsing photos when the outdoor picture is showed on screen, long press the menu button to enter the viewing mode, long press to browse next photo.
Host introduction:
Automatic shutdown after 15 seconds;
Support manual image capture;
3.5-inch TFT LCD screen;
Door Viewer Summary
Door Viewer introduction:
1 million pixel CMOS sensor;
M7 full glass 2 million pixel HD lens;
Support multiple video formats, maximum support 1280*720P (25fps);
With wide dynamic and low illumination function, support automatic color to black;
Adopt 32-bit processor and professional video codec chip;
System introduction:
Use 3 sets AA batteries;
Integrated integrated design, compact structure, high reliability;
full metal cat head shell, beautiful and prevent damage;
Integrated hidden cat head with black host optional;
It is convenient and quick to install through the reserved cat eyes on the door.
EEPROM data storage is adopted, and data storage will not lose after power failure;
Supports up to 32G high-speed TF memory cards;
model
Parameters
YB-X7
3.5-inch smart door viewer
Camera module
Image Sensor
1/4" CMOS（1034）
Effective Pixels
1280(H)×720(V)
Minimum illumination
0.5Lux/F2.0 (color)
0.02Lux/F2.0 (black and white)
White balance
Automatic tracking of white balance
Gain control
automatic
Signal to noise ratio
Greater than 50dB
BLC
automatic
Wide dynamic
YES
Electronic shutter
1/4-1/10,000s
Day and night mode
Filter color to black
focal length
2.4mm
Horizontal viewing angle
100°
Aperture
F2.0
Features
Automatic shut-down
15 seconds
Manual capture
1 piece
parameter
main chip
JR
Indoor machine material
ABS plastic
Outdoor machine material
Zinc alloy
LCD screen type
3.5 inch
LCD screen resolution
960*240
TF card
Maximum support 32G
Maximum image size
1280×720
stand-by current
100UA
Operating temperature and humidity
-30°C-65°C(outdoor) / -10°C-50°C(indoor) Humidity is less than 90%
Protection level
IP55
Installation method
Screw plate
Applicable door
35~110mm
For cat eyes
15~20MM
Package Size
190*117*45mm
Host color
black
Accessories
Screws
M3*30 2/M3*50 2 / M3*60 2/M3*85 2
Mounting base plate
72mm*52mm*6.5mm
TF card
Capacity 8G (optional)
battery
3 sets AA batteries (optional)
Outside the host
1
outside the door
1
charging line
1
screw
8
hanging plate
1
certificate
1
service card
1
product manual
1
AA battery
3 (optional)
memory card
1 (optional)
Enquiry Form ( we will get back you as soon as possible )
